Looking for help with c block front end

JPMKarting

Site Supporter
Then you pretty much got what you got .
Cut weld , bend or modify .

You don't need cut, bend, or modify anything.

The Rage C-Block front end was a unique design.

When we had these chassis, we would use a digital level on top of the C Block to measure castor, and rotate as necessary. Each turn of the pill on the serrated block was approximately 0.25 Degrees of camber per turn.
 

flattop1

Dawg 89
You don't need cut, bend, or modify anything.

The Rage C-Block front end was a unique design.

When we had these chassis, we would use a digital level on top of the C Block to measure castor, and rotate as necessary. Each turn of the pill on the serrated block was approximately 0.25 Degrees of camber per turn.
If he. Has that , then he's in Luck ;)
 

Karl13k

Member
Thanks for the info hope to be in scales Thursday going to try the level for the caster have a camber gauge
 

Slick27

Member
Anyone know if you can get the nut anywhere that goes on the of the C-clamp? (King Pin goes through)

Have mine I just like having spares and a back-up.
 
Top