Curious which chassis and year do you have ?I was wondering where is a good starting point at setting my rear hubs?
It's a 2013 Charger Magnum. I'm just looking for a starting point so I can do poor man scaling.Curious which chassis and year do you have ?
See post # 2, Good Luck !!It's a 2013 Charger Magnum. I'm just looking for a starting point so I can do poor man scaling.
So this is going to sound dumb. But you mean from the back of the hub correct?See post # 2, Good Luck !!
No put wheel and tire on hub, measure from backside of wheel rim ( bead ) to cassette hanger.So this is going to sound dumb. But you mean from the back of the hub correct?
Ok thank you that cleared up a lot. I greatly appreciate it!!No put wheel and tire on hub, measure from backside of wheel rim ( bead ) to cassette hanger.
It will on any kart If you go to close, you don't want to start to close and chase a handling issue, start with closer AVG and tweak from there, as big difference from tweaking for speed than chasing a handling issue.Some say put the wheels as close as you can to the frame both sides. For me it doesnt work. But it was a starting point for me. With the wheels being close to the frame it made me tight on exit of the curve.