bchapman12c
Member
What are some good starting numbers for a scythe?
Adult clone 370What are some good starting numbers for a scythe?
He's not needing quite all that info yet as he's not questioning a handling issue, he's looking for starting numbers and this is there newest model, but your correct not enough detail in original post.I know the keyboard (phone) is not an easy thing to use when trying to send information to the karting community, but you have to try. If you want set up information, that's worth anything, you have to tell people what you have if you expect any response. Kart, type of racing, class, track, front, nose, cross, stagger, (front and rear) tires and pressures.
Nose: 46.0%
Left: 59.0-59.5%
Cross: 68.0-69.0%
LF: Camber: +0.25 | Caster: 7 | Toe: 0
RF: Camber: -2.75 | Caster: 10 | Toe: 1/16" Out
What is an average size track gearing?This is for stock clone 370 on Maxxis for most averaged sized tracks.
That's a loaded question, what do you consider an average size track ?What is an average size track gearing?
Exactly what i'm trying to figure outThat's a loaded question, what do you consider an average size track ?
What is an average size track gearing?
To me, an "average sized" track puts you on a 15 or 16 clutch and around a 60-62 rear sprocket for a clone. (Roughly 4.00 gear ratio)
i run on a 1/7 banked track and am on a 14-61-62 we have a slight hill that we climb from 1-2 and then decend into 3-4
Gotcha most of our tracks are a 12/61 or 13/64.Exactly what i'm trying to figure out
Average around here is 6.20-5.00 range. From my understanding back east not too many tracks that small.