Devil-D-Dawg
New member
The theory of the beefier cover being structurally superior makes some sense unless its complete overkill?
Anyone have an opinion?
Anyone have an opinion?
i have had 2 billet side covers and bolth had o-ring seals
they are well worth the money invested.Not all of our Billet side covers come with a cam bearing, some have a brass insert with a direct (ARC custom) oil valley. Depends on the type of engine. All the Raptor, Blockzilla, Animal, 305 and Honda/Clone Billet covers have a ball bearing. The old style Predator does not. It has the instert with a direct (ARC custom) oil valley.
"Like"....now, can we get them 'made-in-china' as OEM on bsp's....All of our Billet side covers come with not only a O-ring but come with a shim/gasket kit to set the proper crank end play on any Honda/Clone block. They will help control crank and block flex because we use duel crank bearings which give you 4 points of contact on the shaft. This helps by controlling the up and down flex from the combustion and the twisting flex caused by the torque pulling the clutch. This will take stress off of the crank journal. It also helps control block flex by using all 4 dowel pins in the block. The Billet side cover is 5 times more ridged than the block its self and will not stretch, flex or twist like the OEM side cover. This flex/twist leads to sidecover bolts backing out, gasket failure, block fatuge and eventually block failure. Another plus with the Billet side cover is the pre-threded vent holes. These can be used for duel vents or a pulse to run the fuel pump.
"Like"....now, can we get them 'made-in-china' as OEM on bsp's....
that must be where you get that cloned medicimal marijuana your smoking!!!"Like"....now, can we get them 'made-in-china' as OEM on bsp's....
...com'n Jody, do you think 'greater' things have Not sold-out America? (i'm pull'n ur leg...gueez!) "Hundreds of hours(?)...how abt '1000's', or 'years'!!!Hundreds of design and testing hours on this one product alone and Captain America wants it copied in China... That a way to ensure jobs for the future generations...