flattop1
Dawg 89
I have been contemplating this . A few things that i have questions about .
The flywheel and timing . First the fins are going to be oriented wrong , prolly no big deal . Second timing would you just flip the coil over and retime . This seems correct .
Biggest thing is cam . Two options weld the lobes and regrind to suit . Or. Cut the lobes out. Turn them around reweld so there in phase . Both require welding and regrinding to some extent .
Lastly the dipper i suspect it is the same as the flywheel fins not an issue as it still flinging oil .
The flywheel and timing . First the fins are going to be oriented wrong , prolly no big deal . Second timing would you just flip the coil over and retime . This seems correct .
Biggest thing is cam . Two options weld the lobes and regrind to suit . Or. Cut the lobes out. Turn them around reweld so there in phase . Both require welding and regrinding to some extent .
Lastly the dipper i suspect it is the same as the flywheel fins not an issue as it still flinging oil .