Triton jr

B

Bradley71

Member
I had seat over too far left kart wouldnt come off corner to save my soul.got it over to 4.5” off frame rail as everyone talks anyone have anymore pointers.before and after.it was like it was stuck on lr.i added some lead and came home scaled numbers posted below😂
 

Attachments

  • 300BCDE7-48DD-4B1D-9797-53A61F1EFBAE.jpeg
    300BCDE7-48DD-4B1D-9797-53A61F1EFBAE.jpeg
    130.5 KB · Views: 106
  • 9B7B707F-B07E-4739-8C42-0A93D5467B23.jpeg
    9B7B707F-B07E-4739-8C42-0A93D5467B23.jpeg
    153.7 KB · Views: 108
This was numbers after added lead still didnt want to turn i added it to nose bc i was light.maybe moving seat over will help my issues
 

Attachments

  • 35D5D24E-999D-4D2B-8FCD-627131E1C915.jpeg
    35D5D24E-999D-4D2B-8FCD-627131E1C915.jpeg
    85.9 KB · Views: 87
From phantom sheet for adult

58.5-60 left
46.5-47 nose
66-70 cross

Too much nose is not allowing to make traction at rr.

I read the tape measure as 5 1/2 to seat strut.
 
Last edited:
I'm having trouble confirming total weight , it is ? what class , age limit, total min weight are you racing it in ?
The seat is way off, entire seat is to high, back of seat is way to high, center seat spline is to far to the right, seat is mounted tilted to the right to much as flattop points out, numbers are off i'll comment on those after you confirm my questions.
 
racing promotor said:
I'm having trouble confirming total weight , it is ? what class , age limit, total min weight are you racing it in ?
The seat is way off, entire seat is to high, back of seat is way to high, center seat spline is to far to the right, seat is mounted tilted to the right to much as flattop points out, numbers are off i'll comment on those after you confirm my questions.
Click to expand...
Seats 9.25” off top axle.that seat is a nexgen 2.0 its” built with a tilt in right shoulder.” level and not bound in kart.gotta weigh 375.i had it pretty fast but i put new seat in it and tried a different setup.it was a free kart thats why i am running the chassis.
 
Bradley71 said:
Seats 9.25” off top axle.that seat is a nexgen 2.0 its” built with a tilt in right shoulder.” level and not bound in kart.gotta weigh 375.i had it pretty fast but i put new seat in it and tried a different setup.it was a free kart thats why i am running the chassis.
Click to expand...
Wow picture must be deceiving it looks much higher, how much is the bottom of the seat up into the bottom of the frame rails.
 
I set the seat on piece of 1x4 and mounted it.its weird the bottom of the seat is about 2” shorter and the back is longer with that right shoulder dip in it.i guess its to keep ya stationary is rs of seat
 
Bradley71 said:
I set the seat on piece of 1x4 and mounted it.its weird the bottom of the seat is about 2” shorter and the back is longer with that right shoulder dip in it.i guess its to keep ya stationary is rs of seat
Click to expand...
Bottom of seat being up into frame rails 1" is to high for 375 lb class, lower it to 1/8 " up max.
 
What was the kart doing. Rockport is very low grip.
47.5 nose
58 left
64 cross maybe less.
+.5 LF camber - 2.5 RF camber pull both caster blocks to the back hole.
1 1/2 front stagger
1 5/8 + rear stagger
10/12 caster

What did you wipe with What was air. How high is the seat off the rear axle?
 
Dougherty#39 said:
What was the kart doing. Rockport is very low grip.
47.5 nose
58 left
64 cross maybe less.
+.5 LF camber - 2.5 RF camber pull both caster blocks to the back hole.
1 1/2 front stagger
1 5/8 + rear stagger
10/12 caster

What did you wipe with What was air. How high is the seat off the rear axle?
Click to expand...
He states earlier seat is 9.25 " off the axle
 
Some people run less when needed its all situational. Now much you think ole Disco has in this picture?
 

Attachments

  • Screenshot_20220519-193938_Facebook.jpg
    Screenshot_20220519-193938_Facebook.jpg
    100.9 KB · Views: 82
You must log in or register to reply here.
Back
Top