The cases were designed for outboard use but can be machined to except the ignition on the other side if needed when turning the crank arounddo you use a seal adapter plate on both sides , so you can change from inboard to out board
No Billet, But I cast cases for the 250 mx engine.Does anyone other than PK & Buller make billet cases for 250mx cylinders? Thanks.
Text 352 875 0622Does anyone other than PK & Buller make billet cases for 250mx cylinders? Thanks.
Looks awesome as usual.Twin carb set up
Who is making the dual manifold and what carbs are on it?Twin carb set up
Their Mikuni's and yes the 250 can take a lot of carb I have one 34mm on top and a 36mm on bottomProbably 181’s or mikuni 34’s. Note the filter cups are individual unlike the Buller duals where they share a common cup. Plus the buller 360/380’s don’t deliver nearly enough air or fuel on a 250. The 420’s made by Buller for the Bama 250 don’t look like these either
I’ll show you mine if you show me yours...Mine are 34 mikuni's on alky later Chuck
Buller, Sudam only tho...is there anyone that makes 125 cases?